What Should Be Noted When Customizing Vacuum Packaging Bags? Seize These Two Points, Saving Money Is Still Useful

Sep 01, 2025|

What should be noted when customizing vacuum packaging bags? Seize these two points, saving money is still useful
The customization of vacuum packaging bags is never as simple as reporting size and printing logos. Choosing the right one can extend the product's shelf life by three times, while choosing the wrong one may result in package breakage and air leakage right after leaving the factory. So what are the correct steps to customize a vacuum bag that fits your product?
What is a vacuum bag?
Vacuum packaging refers to a packaging method in which a product is placed in an airtight packaging container, the air inside the container is removed, and the sealed container reaches a predetermined vacuum degree.
Vacuum bags, also known as decompression packaging, are used to completely extract and seal the air inside the packaging container, maintaining a highly depressurized state inside the bag. The scarcity of air is equivalent to a low oxygen effect, leaving no living conditions for microorganisms, in order to achieve the goal of fresh fruits and no disease or decay. Applications include vacuum packaging in plastic bags, aluminum foil packaging, glassware packaging, etc. Packaging materials can be selected based on the type of item.
What should be noted when customizing vacuum bags?
Firstly, the materials.
The essence of material selection is to enable packaging to withstand all the challenges of product storage and transportation. The protective ability of vacuum bags made of different materials varies greatly and must be determined according to the core requirements of the product. ​
If the product requires light avoidance and high temperature resistance (such as high-temperature steamed meat and tea), aluminum foil vacuum bags (typical structure PET/AL/PE) are the preferred choice. The aluminum foil layer can firmly block light and oxygen, prevent product oxidation and deterioration, and its high temperature resistance can adapt to sterilization processes. However, it should be noted that its opaque nature is not suitable for scenarios where product appearance needs to be displayed. ​
If the product requires visual display (such as fresh meat, seafood, and popular snacks), a transparent vacuum bag (commonly NY/PE structure) is more suitable. Nylon (NY) material has strong puncture resistance and can prevent sharp edges from puncturing the bag. The flexibility of polyethylene (PE) makes the bag resistant to drops and impacts, especially suitable for packaging products with bones and shells.
There are also some special requirements that require targeted material selection: anti-static composite films (such as PET/AL/CPP) should be selected for electronic components to isolate electromagnetic interference; Chemical products must use special PE materials with corrosion resistance; Lightweight dry goods such as Tremella fuciformis and Goji berries can be selected with a thinner NY/PE structure, which not only saves costs but also does not affect protection. In short, there is no best material, only the most suitable one. ​
Secondly, avoid "invisible" pitfalls.
Choosing the right materials and details, one must also avoid hidden pitfalls in the customization process, otherwise, no matter how good the early design is, it will still waste costs and bear risks in the end. These three tips can help you get through the final hurdle without wasting money. ​
The first trick is to check qualifications: when choosing a legitimate manufacturer, the other party must provide relevant certifications. Our factory has complete qualifications and uses raw materials for production. We refuse to use secondary materials and produce bags with good texture and high quality. Factories that cannot provide testing reports are likely to use recycled materials to make bags, which not only have odors but may also contaminate products. This step can help you avoid 90% of pitfalls. Don't try to save money by trying to get cheap. Once there is a problem, the loss will far exceed the packaging cost. ​
The second method of quality testing: After receiving the bag, carefully observe its stiffness, that is, its flatness. Generally, the higher the flatness, the better the appearance quality of the bag. However, it is necessary to exclude certain special cases, such as bags made of nylon and high-pressure film composite, where the heat seal may appear wavy, which does not mean that their flatness is poor. Next, it is necessary to carefully check whether the cutting edges of the bag are regular. The higher the regularity, the better the appearance quality of the bag is usually. You can also do a boiling test: seal the empty bag, immerse it in 80 ℃ hot water, and observe if there are any bubbles emerging. If there are bubbles, it indicates that the heat seal has leaked. ​
The third trick is to compare costs: don't just look at the unit price, calculate the "comprehensive cost". For example, when the customized quantity is less than 5000, the unit price will be higher (because the plate making fee is shared more). Multiple companies can be compared, but horizontal comparison is necessary to compare products of the same quality, and price should not be the only factor. In addition, thicker is not necessarily better. For example, when packing dry goods, choose a thinner NY/PE structure that is both protective and cost-effective, and there is no need to waste it.
The logic of customizing vacuum packaging bags is actually very simple: first clarify the core requirements of the product, then select the appropriate materials, pay attention to details, and finally use qualifications and testing to avoid pitfalls. Customization that can safely deliver products to consumers, adapt to storage and transportation processes, and convey brand image is valuable. ​

Send Inquiry