Is there a constant stream of claims for package bursting during express delivery? Three tips to teach you how to choose the right packaging

May 19, 2025|

Is there a constant stream of claims for package bursting during express delivery? Three tips to teach you how to choose the right packaging
The leak proof performance of food packaging directly affects product quality and consumer experience. Different categories of food have different requirements for leak proof due to their unique characteristics. The core logic of leak proof design is analyzed from three common scenarios: rice and miscellaneous grain bags, snack bags, and beverage flexible packaging. ​
1, Rice and miscellaneous grain bags
Rice and miscellaneous grains have a certain hardness, and long-term storage can easily cause damage to the bag due to friction or compression. The material needs to balance high strength and moisture resistance. It is recommended to use PA (nylon) and PE composite. PA's high-strength characteristics can resist the puncture of particle edges, improve the bag's resistance to impact, and use food grade heat sealing film on the inner layer to ensure tight sealing. It should be noted that although a single PE or PP material has low cost, it has weak puncture resistance and is easily punctured by sharp rice grains during transportation; The addition of PA can significantly improve impact resistance, especially suitable for medium and large-sized packaging weighing over 5kg, reducing micro cracks caused by compression during transportation. ​
The preferred bag type is an upright bag or an octagonal sealed bag. The flat bottom design can disperse gravity, reduce side compression stress, and avoid cracking of the heat sealing layer due to long-term stress at the sealing area. The packaging of rice and miscellaneous grains relies on heat sealing technology, and it is necessary to ensure uniform sealing width to avoid leakage caused by folding and folding. The position of the handle should match the load-bearing strength of the PA composite layer to prevent local tearing during lifting. ​
Storage also requires attention to temperature and humidity control and stacking methods. High temperature and humidity environments can accelerate material aging. It is recommended to store at a temperature not exceeding 25 ℃ and keep humidity below 60%. When storing and stacking, the stacking height should be set according to the load-bearing parameters of the PA composite layer to avoid sealing deformation of the bottom bags due to compression. During transportation, it is necessary to prevent bumps and reduce the impact of particles on the bag wall by lining with cushioning materials. Special attention should be paid to avoiding mixing with sharp objects.
2, Snack bag
The key to preventing leakage of fried snacks such as potato chips and nuts is oil resistance and antioxidant properties. The outer layer is commonly made of PET (polyester) to enhance stiffness and transparency, the middle layer is made of composite aluminum film or aluminum plated film to block oxygen and ultraviolet rays, and the inner layer is reinforced with CPP for oil resistance. For snacks with particles or sharp corners (such as cookies and puffed foods), an anti puncture film should be added to the inner layer to prevent sharp objects from puncturing the bag wall and causing oil and gas leakage. Soft candy packaging should focus on the flexibility of the material to prevent hard and brittle cracking in low-temperature environments. It should be noted that if the bag is equipped with a zipper, the density and fit of the zipper teeth directly affect the sealing effect. A narrow tooth pitch can easily accumulate residue after frequent opening and closing, leading to loose closure.
In terms of storage environment, managing unopened snack bags after opening should avoid direct sunlight, as ultraviolet radiation can accelerate the aging of the inner layer material, leading to a decrease in oil resistance performance. For snacks with high oil content, long-term exposure to an environment above 20 ℃ is prone to oxidation and rancidity. The high oxygen resistance of the material is needed to delay deterioration, but it cannot completely replace low-temperature storage.
3, Beverage flexible packaging
The packaging of liquid beverages (such as juices, sauces, dairy products) needs to withstand the weight of the contents and external pressure, and the material should have both flexibility and impact resistance. Commonly used PA (nylon)/PE composite film, the PA layer provides high-strength puncture resistance, and the PE layer ensures heat sealing performance; For high-temperature sterilization products (such as cooking bags), it is necessary to use cooking resistant materials that can withstand temperatures above 121 ℃ to avoid interlayer peeling caused by temperature changes. Suction nozzle packaging requires special attention to the welding strength between the suction nozzle and the bag body, as this is a high-risk area for liquid leakage. ​
On the bag type, self-supporting nozzle bags are the mainstream choice, and the bottom support structure of the bag needs to undergo pressure testing to ensure that it stands steadily without tipping over after being filled with liquid. For beverages that are prone to shaking (such as sports drinks), anti slip patterns or pressure resistant edges can be added to the bag body to reduce collision damage during transportation. ​
When stacking, keep the suction nozzle facing upwards to avoid deformation caused by heavy pressure; During transportation, it is necessary to control the frequency of turbulence, especially for carbonated beverages (such as carbonated water). Severe shaking may cause a sudden increase in internal pressure and break through weak sealing areas. ​
There is no universal solution for preventing leakage in food packaging. The core lies in selecting an appropriate solution based on the characteristics, frequency of use, and circulation environment of the food. In design, it is necessary to address the pain points of core scenarios and control the risk of leakage within an acceptable range through the most cost-effective solution.

Send Inquiry