video

Plastic Food Grade Dried Mango Food Bag

Item: Stand up dried mango bag
Size: 12*18+8cm or customized
Material: BOPP/VMPET/PE or customized

  • Product Introduction

Chewy dried mango fails in two directions: too much moisture turns the surface tacky and raises mold risk; too little hardens slices and shifts fill weight. A Plastic Food Grade Dried Mango Food Bag solves both by combining a printable outer film, a metallized or foil barrier core, and a food-grade PE sealant, with handle and resealable zipper. What decides success is not the format. It is whether the barrier layer holds water activity (aw) inside your target window through transit and shelf life - for most dried mango SKUs, that requires WVTR at or below roughly 0.5 g/(m²·24h).

 

This pouch runs at our food-contact facility, where gravure printing, lamination and bag-making stay under one roof.

 

image001

Moisture, Oxygen and Seal: What Actually Fails

A working dried mango pouch holds WVTR at or below roughly 0.5 g/(m²·24h) under stated test conditions such as 38°C/90% RH, with a sealant thick enough to survive pallet compression. 

  • aw drift.

Moisture pickup pushes aw above the safe band; moisture loss hardens slices and shifts fill weight.

  • Oxygen and light.

Both dull the natural orange color and degrade sensitive compounds over shelf life.

  • Weak seals.

A thin PE seal fails at the gusset and zipper root under pallet compression.

  • Edge abrasion.

Sharp slice edges work at the laminate from inside during stacking and drop tests.

 

A standard PET/PE bag may pass a visual check and still fail after four weeks at 38°C/90% RH. For this Plastic Food Grade Dried Mango Food Bag, the practical starting structure is BOPP or matte BOPP for print and scuff resistance / VMPET for moisture and light barrier / 100–120 micron food-grade PE sealant.

 

VMPET alone is usually not enough for high-oil inclusions; a foil-containing structure or EVOH layer is then worth the cost step-up, and OTR targets depend on how oxygen-sensitive the inclusion is. For pure dried mango, the VMPET core is usually sufficient without an EVOH step-up. 

plastic-food-grade-dried-mango-food-bag
3
 
 
Design and Print Choices That Affect Shelf Life and Shelf Presence

The standard format is a flat-bottom stand-up pouch with handle and resealable zipper: shelf stability in retail and e-commerce, plus a handle for club-store and foodservice multipacks. A flat bag with handle is available on request when the fill line or carton geometry calls for it. A resealable zipper is not decoration - repeated opening and closing is where moisture ingress accelerates after the first sale, and a weak zipper undercuts whatever shelf-life target you have committed to your buyer. Finish is merchandising-only. Gravure printing up to 9–10 colors handles photographic mango imagery and fine regulatory text in one pass. Final style is confirmed on artwork before cylinder approval. 

 product-750-721

Flat Bag or Stand-Up Pouch: Which Fits Your Fill Line?

 

A flat bag with handle suits vertical form-fill-seal lines and tight carton geometry. A flat-bottom stand-up pouch stands on shelf, merchandises better in retail and e-commerce, and is easier to reseal after opening.

If your retail buyer expects shelf presence, stand-up wins; if your line is already tooled for flat bags and the carton is the constraint, stay flat. Both formats can be quoted from the same artwork.

2

 

11
 
 
Factory Credentials You Can Actually Audit

We have run production since 1998. If your retail customer requires BRC or ISO 22000, certificate scope and latest audit reports are available before PO, not after. Printing, lamination and bag-making stay under one roof, so a failed seal test can be re-run in-house instead of waiting on an outside laminator. 

 

Our QC team runs the WVTR check on new lamination batches at 38°C/90% RH before the structure is released to production. Each batch is inspected against the approved specification before packing. Export markets include North America, Western Europe, Eastern Europe, Japan and Southeast Asia. Food-contact grade materials are used. COA per batch, material declaration, and migration test reports where required - during RFQ we confirm which set applies to your destination market so your QA team reviews the right file before PO. 

Specification Table

Two tables, split by what a buyer actually compares at RFQ stage: product spec first, commercial terms second. Final size, caliper and bag style are confirmed against your fill weight and artwork before tooling.

Product Specification

Parameter Standard Spec
Item Stand up dried mango bag; standard format is flat-bottom stand-up with handle; flat bag with handle available on request
Size 12 × 18 + 8 cm, or customized to fill weight and slice geometry
Material BOPP/VMPET/PE, or customized; foil or EVOH available if OTR requirements tighten
Thickness 120 microns total caliper, or customized; original spec wording "120 microns/side" confirmed against total caliper on artwork
Feature Flat-bottom stand-up with handle, high barrier, moisture proof, matte surface
Surface Handling Gravure printing, up to 9–10 colors
OEM Yes - artwork, size, structure and closure customized to your SKU

Order and Commercial Terms

Item Terms
MOQ 50,000 pcs for custom print; stock-size unprinted bags are available in smaller trial quantities - ask for the current stock-bag minimum
Lead time Typically 20–40 days after artwork approval and deposit; varies with cylinder readiness and material availability
Samples Stock-size samples before custom cylinder; printed proof after artwork approval; sample cost and courier account confirmed at RFQ
Payment methods PayPal, Western Union, TT and Bank Transfer, etc.; confirm surcharges and currency before PI
Payment terms Normally 50% bag cost plus cylinder charge deposit, full balance before delivery; pre-shipment inspection report and retained samples provided before balance payment
Shipping terms FOB / CIF / EXW, based on customer reference; quoted against your preferred Incoterm and destination port
Shipping guidance Below 100kg: express such as DHL, FedEx, TNT; 100–500kg: air; above 500kg: sea

product-750-806

FAQ

1. Do you inspect every production run of the dried mango pouch?

Yes. We inspect print registration, dimensions, seal strength, appearance and seal integrity at each production step and before shipment. Every run is checked against the approved specification.

2. Can you give some standard size for reference?

There is no universal standard size. Capacity depends on slice geometry and bulk density, so a generic chart can underfill or overfill by 15–20%. Share your target fill weight and a product sample, and the size recommendation follows from that.

3. What information should I provide to get a quotation?

The size of the products (length, width, thickness)
The material and the surface handling
The printing color
The quantity
If possible, provide pics or a design sketch; samples are best for clarifying.

4. For dried mango bag, matte surface and glossy surface, which one is better?

Technically the barrier is the same; the finish does not change WVTR. Choose gloss if your artwork relies on vivid fruit color and fine-text contrast; choose matte if scuff hiding and a softer premium look matter more. We can send a printed proof under retail lighting before cylinder approval so the decision is made on the actual substrate.

5. What shelf life can a dried mango pouch achieve?

It depends on the fruit's starting aw, fill weight, and the barrier you choose. Confirm the number against your own accelerated shelf-life test rather than a supplier's brochure.

 

Before You Request a Quote

 

Use the inquiry form on this page - three required fields (fill weight, destination market, quantity) plus optional material and print details are enough for a first quote. We reply within one business day with a structure recommendation, indicative price and sample lead time. No cylinder deposit is required until artwork is approved. If you are not ready for a custom cylinder, start with a stock-size sample and a trial quantity - both are available before the 50,000-piece commitment.

 

 

 

 

Product Specification

Item

Stand up dried mango bag

Size

12*18+8cm or customized

Material

BOPP/VMPET/PE or customized

Thickness

120 microns/side or customized

Feature

Flat bag with handle,high barrier, moisture proof, matt surface

Surface Handling

Gravure printing

OEM

Yes

MOQ

50,000 pieces

 

More Bag Type

There are many different bag types according to different usage, check below picture for details.

image004

Hot sale

image006

Different Material Options

We mainly make laminated bags, you can choose different material based on your products and self preference.

image008

 

Different Printing Technique

For bag surface, we can make matt surface, glossy surface, also can do UV spot printing, golden stamp, making any different shape clear windows.

image010

Our Service

We mainly do custom work, which means we can produce bags according to your requirements, bag type, size, material, thickness, printing and quantity, all can be customized.

image022

You can image all designs you want, we take charge in turning your idea into actual bags.

image024

Customer's visiting:

image016(001)

Payment Terms&Shipping Terms

We accept PayPal, Western Union, TT and Bank Transfer, etc.

Normally 50% bag cost plus cylinder charge deposit, full balance before delivery.

Different shipping terms are available based on customer reference.

Normally, if cargoes below 100kg, suggest ship by express like DHL, FedEx, TNT, etc, between 100kg-500kg, suggest ship by air, above 500kg, suggest ship by sea.

image018

Package

Mainly we pack the bags with common export paper cartons, and then coated with wrapping Film for moisture proof.

image020

 

Sample Room

image022

 

FAQ

1, Do you have any inspection for the stand up zipper bag?

YES, we do have strict-standard inspection in every step of the production and before shipping to make sure the products are qualified.

 

2, Can you give some standard size for reference?

The capacity for products may vary depending on their density, please advise your exact products.

 

3, What information should I let you known if I want to get a quotation?

1. The size of the products (length, width, thickness)

2. The material and the surface handling

3. The printing color

4. The quantity

5. If it is possible, pls provide the pics or design stretch. samples will be the best for the clarifying.

 

4, For dried mango bag, matt surface and glossy surface, which one is better?

From technical view, they are the same, matt or glossy depend on customers' preference. Just personal suggestion, glossy surface for dried fruit bag will let your product be outstanding.

Hot Tags: plastic food grade dried mango food bag, China plastic food grade dried mango food bag manufacturers, factory, waterproof dried food bag, Plantain Chips Bag, tuna jerky dried food bag, heat sealable dried food bag, Food Bag Packaging Design, granola dried food bag

Next: No Information →
Send Inquiry

(0/10)

clearall