video

Chocolate Bar Candy Wrapper Packaging

Chocolate bar candy wrapper packaging: Many pouches are produced to customer specifications with a choice of sizes, colors, printed and unprinted. For more information provide the size, application, and quantity required to: manager@jurenbz.com.Whatsapp:0086-15100212979 . Key benefit of...

  • Product Introduction
Materials and Barrier Performance

The major hazards for Chocolate Bar Candy Wrapper Packaging consist of the risks of rancidity and oxidation of cocoa butter, bloom, moisture gain, and recrystallization of sugar or loss of aroma. The design of the structure depends on the cocoa content, whether there are nuts and fillings in the bar, the period of preservation, and the climate of the market for which the product is produced.

Laminate Structure Performance Focus Suitable Products Barrier Level
PET / PE Basic moisture barrier, high clarity, lowest cost Short-shelf-life chocolate bars with a secondary outer paper box Medium
PET / VMPET / PE Metallized light barrier; blocks moisture vapor and oxygen Mainstream milk chocolate bars, ambient shelf life 9–12 months Medium-high
PET / AL / PE Full aluminum foil light block; highest oxygen and moisture barrier High-cocoa products, long shelf life, tropical/hot-climate export markets High
PET / NY / PE Nylon puncture resistance, rub resistance, drop resistance Chocolate bars with nuts, wafers, or crisped rice Medium (mechanical strength first)
PET / AL / NY / PE Foil barrier plus nylon puncture resistance Premium gift boxes, long-haul ocean export Highest
PET / kraft paper / PE Kraft paper feel and natural look; PE inner heat seal Handmade, single-origin, sustainability-positioned products Depends on inner layer

Reference values (third-party test reports govern; not guaranteed):

  • OTR (oxygen transmission rate): For PET/PE, it is approximately 80-120 cm³/(m²·24h·0.1MPa); For PET/VMPET/PE, it is approximately from 0.5 to 2; For PET/AL/PE, it is less than or equal to 0.05.
  • WVTR (water vapor transmission rate): For PET/PE, it is approximately 3-6 g/(m²·24h); For PET/VMPET/PE, it is approximately from 0.5 to 1.5; For foil structures, it is less than or equal to 0.05.
  • Heat seal strength: Not lower than 25 N/15mm.
  • Peel strength of laminate: Not lower than 1.5 N/15mm (As for the foil structures, use actual test results).

If there is already information concerning the shelf life and temperature of shipping for the target market, it is possible to establish the amount of layers needed based on the probability of cocoa butter migration and the risk of bloom, thus avoiding overpackaging.

Sealing and Reseal Performance
  1. Cold seal adhesive position sealing: sealing takes place at pattern positions, avoiding printed graphics as well as text and allowing control over the peel strength as well as safeguarding the seal area from chocolate crumbs.
  2. Heat seal window: PE layer inside is between 130°C and 160°C; CPP layer inside is between 150°C and 180°C; calibrate system depending on actual machine speed as well as pressure.
  3. Zippers: zip-close format and pocket zipper; support multiple openings.
  4. Easy-open features: laser scoring and tear notch; straight, controllable tear line
  5. Shapes and holes: rounded corners, euro hole, round hole; suitable for hang display
3

Products Description

Item Customizable Content
Size Bag width, bag height, bottom gusset/side gusset, bag top structure; roll film custom by width, bag length, and repeat length
Material The six laminate structures above, selected by barrier needs; equivalent sampling available after sample analysis
Thickness 40–150 μm; when foil structures are below 50 μm, flex resistance drops; for long-haul shipping, add an NY layer
Printing Gravure (8–10 colors, registration accuracy ±0.1 mm); digital printing (no plate fee, good for many SKUs and small runs); unprinted plain film available
Surface Treatment Matte, gloss, spot UV, hot stamping gold/silver, soft-touch film, holographic, clear window
Functional Add-ons Clear window, laser scoring, press-to-close zipper, pocket zipper, rounded corners, tear notch, euro hole, round hole

 

Artwork Requirements and Sampling Process

 

File requirements:

Format: AI / PDF / EPS (vector preferred); convert text to outlines; raster images 300 dpi or higher

 

Color: CMYK process plus PANTONE spot color numbers; for foil/VMPET substrates, specify spot-color overprint effects

 

Bleed: 3 mm; for roll film, mark repeat length, color mark position, and cold seal adhesive coating area (separate layer)

Sampling and color approval process:

Confirm artwork and specs → 2. Digital proof / blank material sample (confirm structure and hand feel) → 3. Gravure proof or wet proof → 4. Both parties sign off and keep sealed samples → 5. Production is judged against the signed sample; batch-to-batch color difference is judged by visual comparison to the signed sample plus ΔE

1

MOQ and Lead Times

Item Rule
Unprinted plain film MOQ 300 kg / spec
Gravure printing MOQ 500 kg / design / spec; plate fee charged once; refundable when cumulative orders using the same plates reach 3,000 kg
Digital printing MOQ 100 kg / design; no plate fee; unit price about 25–40% higher than gravure
Foil / nylon structures 20% above the above MOQ (material minimums and process loss)
Spot cold seal adhesive coating Add 100 kg to the above MOQ
Sampling 3–5 business days; sample fee can be deducted from the formal order
First order lead time About 20–25 business days, including plate making and sample approval
Repeat order lead time About 12–18 business days (same structure, same plates; no need to redo sample approval)
Digital printing lead time About 8–12 business days

 

f
 
 

Quality and Compliance Documents

Documents shipped with each order and available on request:

Certificate of Analysis (COA) for each batch: thickness, heat seal strength, peel strength, coefficient of friction, appearance

Barrier performance test report: OTR / WVTR (third party, issued by structure)

Solvent residue test report (solvent-free lamination process, suitable for food-contact requirements)

Food-contact material compliance statements: GB 4806 series (China), FDA 21 CFR (US), EU 10/2011 and 1935/2004 (EU)

Migration, heavy metals, and sensory test reports available on request

Traceability and after-sales: each roll/box is marked with a production batch number; retention samples are kept for 12 months. For poor sealing, delamination, registration deviation over 0.2 mm, short quantity, etc., we will replace or issue credit per written terms.

Production Equipment Advantages
 

High-speed gravure press: 8–10 color stations, electronic shaft registration, registration accuracy ±0.1 mm; supports foil, metallized, and kraft paper laminates

 

Solvent-free laminator: low solvent residue, uniform laminate strength, meets food-contact material requirements

 

Spot cold seal adhesive coater: pattern-position coating; coating weight and peel force are controllable

 

Curing room: segmented temperature and time control to ensure laminate curing and residue compliance

 

High-speed slitter and inline inspection machine: automatic defect marking and rejection; controls splice count and roll diameter consistency

 

Bag-making lines: support zippers, rounded corners, euro holes, and special-shape bag forming

product-787-499

 

Factory And Company Advantages


Own production base, not a trading company: printing, lamination, curing, slitting, and bag making all run on our own lines; scheduling and quality control are under our control

Upfront structure selection: recommend structures based on target shelf life, shipping temperature, and cocoa butter content, so specs are neither overkill nor too weak

Machine run support: provide roll film parameter sheets and run recommendations; trial material available when needed

Multiple SKU capability: gravure and digital channels run in parallel, covering both large orders and small multi-spec orders

Complete document package: test reports and compliance statements match the actual materials and target market; supports importer customs clearance and retailer audits

Stable long-term supply: common-grade raw materials kept in stock; repeat orders get priority scheduling

0

As a bulk supplier of Chocolate Bar Candy Wrapper Packaging, we organize production according to the buyer's technical specifications and order terms. Delivery standards are based on signed samples and the written specification sheet.

Hot Tags: chocolate bar candy wrapper packaging, China chocolate bar candy wrapper packaging manufacturers, factory, heat sealable dried food bag, turkey jerky dried food bag, Plantain Chips Bag, Potato Chips Snack Food Pouch, pork jerky dried food bag, cereal dried food bag

Send Inquiry

(0/10)

clearall